Accessories

Key Features

• For Mobile Journalism, Content Creation
• 2 x Transmitters with Built-In Omni Mics
• One Dual-Channel Receiver
• Clip-On, Compact Form Factor
• Up to 656' Transmission Distance
• LED Indicators, Noise Cancellation
• 8-Hour Battery Life
• Plug and Play Pairing
• USB Type-C Charging Ports

Record up to two people in mobile journalism or content creation applications using this 2.4 GHz LARK M1 DUO Wireless Microphone System from Hollyland. The system includes two transmitters with built-in, omnidirectional microphones and one dual-channel receiver—all with a compact form factor. Clips on the back of each transmitter allow you to attach them to the lapel of a shirt. With a TRS to TRS and TRS to TRRS adapter cables, the receiver can be plugged into compatible cameras or smartphones.

Audio can be transmitted from up to 656' away thanks to its auto frequency hopping technology. Integrated into each component's design are LED indicators to display its power and connectivity status. Noise cancellation technology can be toggled using the onboard controls and helps highlight vocals over ambient noise. Intuitive plug and play pairing allows you to use the system right out of the box. Record audio for up to 8 hours and recharge in 1.5 hours using the USB Type-C ports or charging case.

Features at a Glance

• One-click noise cancellation feature delivers high-performance recording quality by cutting out ambient noise for clearer voice recordings
• Receiver and transmitter feature built-in clips for installation
• Plug-and-play configuration with device identification auto-adjusts mobile and camera volume settings
• 3-level volume presets: high, mid, and low
• LC3 codec technology with 48 kHz, 16-bit sampling rate
• Up to 656' wireless transmission range
• 2.4 GHz adaptive frequency hopping
• LED status indicators
• Comes with TRS to TRS and TRS to TRRS cables for compatible cameras and smartphones
• Separately available 3.5mm TRS to USB Type-C or 3.5mm to lightning adapters for use with smartphones and tablets
• Compatible with Android and iOS operating systems
• Compatible with select Sony, Canon, Nikon, Fujifilm, and Panasonic cameras

xKey Features

• Compatible with URSA Mini & Mini Pro
• Record Start/Stop, Iris & Focus Control
• Rubber Thumb Rest
• Rosette Mount and LANC Cable Connection

Key Features

• 1 RU Height

For users of Blackmagic Studio Converters, HyperDeck Studio HD Plus, and any combination of 1/3, 1/2, and 2/3 rack width products who want to rack-mount their units, the Blackmagic Universal Rack Shelf is a sturdy support for all HyperDeck Studio Minis, Teranex Mini Converters, Web Presenters, and ATEM TV Studio HD

Blackmagic DeckLink Micro HDMI cable

High-quality, professional-grade, reliable, The Blackmagic Design DeckLink Micro Recorder HDMI cable is the ultimate solution for providing HDMI to the Blackmagic design DeckLink Micro Recorder for HD video capture card.

• Compact design for easy portability
• HDMI input for capturing high-quality video and audio
• Supports resolutions up to 1080p at 30fps

Key Features

• Standard SFP Cage
• LC Fiber Connections
• Supports SD, HD, and 4K Resolutions

Blackmagic Design ADPT-6GBI/OPT Overview

Add an LC fiber optic connection to your Blackmagic Studio Camera, Teranex Converter, ATEM hardware, or any other professional device that supports SFP cages with this Blackmagic Design 6G SFP Optical Module. 6G data rates support SD, HD, and 4K resolutions, and the fiber optic communication allows for long-distance transmission without quality loss.

Key Features

• Rack-Mount Up to 3 Teranex Mini Units

Rack-mount up to three Teranex Mini units side-by-side using this lightweight, 1U Teranex Mini Rack Shelf for 19" racks from Blackmagic Design. This shelf is well-suited for road cases as well as equipment racks.

Key Features

• 288-Input/288-Output Crosspoint Routing
• Supports SDI and Optical SDI Interface
• Supports SD, HD, 2K, and 4:4:4
• Modular Interface Cards
• Each Interface Card Features 4 x I/O
• Auto Standards Detection
• All Outputs are Re-Clocked
• Supports Hardware and Software Control
• 2 x Power Supplies

The Blackmagic Design Universal Videohub 288 Full Redundant Router enables crosspoint routing between 288 inputs and 288 outputs. The router supports up to 72 modular interface cards, with each card supporting four inputs and four outputs. Interface cards are available with either SDI or Optical SDI connectors supporting 3 Gb/s video signals. This allows you to mix and match cards, so your router can be either all SDI, all optical-SDI, or a mix of SDI and optical-SDI.

Each interface card features auto standards detect, so you can connect your video, and the card will auto detect the video signal. All outputs are re-clocked for smooth video display. Ethernet connection permits control of the router via hardware control surface, tablet, or computer. You can also customize your own control units with the available SDK (Software Development Kit). This unit comes with a second power supply for uninterrupted running if one fails.

Key Features

• For UltraStudio 4K Extreme
• PCIe Adapter Card & Cable
• Faster than Thunderbolt

Blackmagic Design BDLKULSR4KEXTSPK Overview

Connect your UltraStudio 4K Extreme to your computer via PCIe using the PCIe Cable Kit from Blackmagic Design. The kit includes a high-speed Gen 3 PCI express plug-in card and cable, and delivers higher data transfer speeds than Thunderbolt. The PCIe adapter card needs to be installed in your computer's PCIe slot and the cable connects your UltraStudio 4K Extreme's PCIe port to the PCIe port at the back of your computer.

• Packaging Details: 0.400 kg