Video Switcher

• Uncompressed capture for live streaming, comply with UVC & UAC
• 13.3 inch FHD IPS LCD monitor
• 6 channel inputs:4×SDI & 2×HDMI
• 1×USB type-C out, 2×SDI & 1×HDMI PGM out, 1×SDI & 1×HDMI multiview out
• 1×SDI AUX output, can be selected as PGM or PVW
• Multi-format input auto-detected and PGM outputs format selectable
• T-Bar/ AUTO/ CUT transitions & Mix/ Fade/ Wipe transition effects
• PIP mode size and position adjustable
• Support audio MIXING and AFV mode
• GPIO for Tally, FTB for emergency

• Various optical zoom lens: 5×/10×/12×/20×/30× optical zoom lens for option
• Rich interface outputs: Support HDMI, 3G-SDI, USB3.0, USB2.0 & LAN
• Multiple control protocol: Support VISCA, PELCO-D, PELCO-P protocols
• LAN port for video stream: Support RTMP, RTSP & Onvif
• USB port for capture video, complying with UVC for live streaming
• 3.5mm stereo audio(line-level) in
• Optional: PoE (Power Over Ethernet) & NDI HX

• Uncompressed capture for live streaming, comply with UVC & UAC
• 6 channel inputs: 4×SDI and 2×DVI-I/ HDMI/ VGA/ USB player
• 3×SDI/ HDMI PGM outputs, 1×SDI AUX output, 2×SDI/ HDMI multiview outputs
• T-Bar/ AUTO/ CUT transitions and MIX/ FADE/ WIPE effects
• Luma Key/ Chroma Key for virtual studio
• Record PGM video to SD card, up to 1080p60
• Remote PTZ camera control: Visca & Pelco D/P protocols
• PiP & PoP mode size and position is adjustable
• Audio mixer: XLR/ RCA audio & SDI/ HDMI/ USB embedded audio
• Tally port for multiple camera system

 

Key Features

• 3G/HD/SD-SDI Input (Auto-Selecting)
• HDMI Type-A Output
• 3G/HD/SD-SDI Loop Out
• Supports up to 1080p60 Resolution
• Works 24/7 without Lag/Delay
• Micro-USB Port for Power
• AC Power Adapter Included
• Can Be Connected to Power Banks, Etc.
• LED Power Indicator
• Mounting Bracket Included

The AVMatrix Mini SC1112 from Lilliput Electronics is an ultra-compact SDI to HDMI signal converter in a robust metal housing.

The Mini SC1112 features a 3G-SDI input and full-size HDMI output, and an SDI loop out for monitoring. It supports up to 1080p60 resolution and auto-selects between 3G, HD, and SD on input. EMC compliant, the Mini SC1112 can reliably be used 24 hours a day, 7 days a week without interruptions, lag, or delay. A mounting bracket is also included that easily attaches/detaches and allows for convenient mounting indoors or outdoors.

The Mini SC1112 has a USB port for power and an LED indicator that confirms power status. An AC adapter is supplied that connects into the micro-USB port to provide continuous power, but you can also connect it to other sources over a USB cable (included). For example, you can connect it to a laptop or a power bank. A 10,000mAh power bank will run the converter for approximately 24 hours.

The converter is also capable of working in a wide temperature range of -4 to 140°F.

• Packaging Details: Packaging Info Package Weight 0.9 lb Box Dimensions (LxWxH) 4.6 x 3.3 x 3.1"

Key Features

• 1x SD/HD/3G-SDI Input & 1 x Loop Output
• 1 x HDMI Type A Output
• DCI 2K SDI In/Out | 1080p60 HDMI Out
• AC Power Supply & Socket Adapters
• 3D LUT for Calibrating or Loop Output
• SDI A/B Selection | USB Power
• Embedded Audio
• Compact, Rugged Design
• LED Video & Power Signal Indicators

Blackmagic Design Micro Converter Overview

Super compact and rugged, the Micro Converter SDI to HDMI 3G from Blackmagic Design enables you to use HDMI-input monitors and televisions for production monitoring. This compact converter has one SD/HD/3G-SDI input, one HDMI output, and one SD/HD/3G-SDI loop output. It includes a 17-point 3D LUT that can be used to calibrate HDMI- or SDI-input monitors and it can output a LUT for viewing via the SDI loop output. The Micro Converter SDI to HDMI 3G also features automatic SD, HD, and Level A and B SDI detection and support for a wide range of pro broadcast resolutions including cine-style 48 fps.

This pocket-sized converter features a sturdy metal housing with power and signal LED status indicators and rugged connector interfaces. A USB Type-C port enables the SDI to HDMI 3G converter to easily connect to and be powered by large-screen monitors, laptops, desktop computers, or projectors. You can also power this converter using the included 100-240 VAC power supply, complete with four international socket adapters.

FeaturesHDMI & SDI Outputs

• One SD/HD/3G-SDI input
• One HDMI output and one SD/HD/3G-SDI loop output

Compact, Rugged Design

• Robust metal housing and rugged connectors
• USB Type-C port for powering via a compatible component like a monitor or laptop
• Updatable via the USB Type-C port and your Mac or PC

3D LUT Support

• Supports a 7-point 3D LUT for color calibrating your monitor, television, or projector
• Outputs LUT for monitoring via SDI loop output

Wider Resolution Support

• SDI support up to DCI 2Kp60
• HDMI support up to 1080p60

Embedded Audio

• Supports embedded HDMI input and embedded SDI output

LED Indicators

• LED indicators for video and power signals

Versatile Power Options

• Power from a monitor, laptop, or other component using the USB Type-C port
• Includes a 100-240 AC power supply with four socket adapters

Key Features

• Advanced High-Data Rate Signal Converter
• Supports Up to 4K DCI 4096x2160p Signals
• Two Independent 12G-SDI Outputs
• Run 4096x2160p 70 ft Using 6G-SDI Cables
• XLR Connections Switchable to AES/EBU
• Ethernet Port for Remote Control or PoE
• Supports Optional LCD Smart Front Panel
• Intelligent Thermal Heat Dissipation
• 3 Units 1U Rack-Mountable in 19" Rack
• Manage Numerous Units from a Mac or PC

Key Features

• Advanced High-Data Rate Signal Converter
• Supports Up to 4K DCI 4096x2160p Signals
• Two Independent 12G-SDI Outputs
• Run 4096x2160p 70 ft Using 6G-SDI Cables
• XLR Connections Switchable to AES/EBU
• Ethernet Port for Remote Control or PoE
• Supports Optional LCD Smart Front Panel
• Intelligent Thermal Heat Dissipation
• 3 Units 1U Rack-Mountable in 19" Rack
• Manage Numerous Units from a Mac or PC

Key Features

• Standard Deck Controls for up to 8 Decks
• 8 x RS-422 Ports
• Supports Legacy Decks and HyperDeck 8K
• 3 RU, Half-Rack Width Installation
• Built-In Editor for Deck-to-Deck Editing
• Flexible In and Out Point Entry
• Pre-Roll Edits to Cue Decks
• Full Timecode Display and Deck Status
• Search Dial for Jog/Shuttle/Positioning
• 8 Recorder/8 Player Selection Buttons
• Automate Editing between Tape and HyperDeckThe built-in editor allows deck-to-deck editing. Operating the same way as traditional decks, the HyperDeck Extreme Control can control legacy decks and the HyperDeck Extreme 8K HDR from the same front panel. To edit old videotape simply press the "PLAYER" button, enter in and out points on the tape, select the recorder, and press "EDIT". The HyperDeck Extreme Control will now cue and play the broadcast deck while recording on the HyperDeck.Traditional and Elegant Transport ControlsYou get familiar transport controls such as "PLAY" which, when pressed during a recording, will cause the recording to stop and the deck to continue to play from the same point. To start a recording, press both the "REC" and "PLAY" buttons simultaneously.Premium Search Dial for Jog and ShuttleThe high-quality search dial features both jog and shuttle control and has an electronic clutch that stops the knob at the end of the shuttle travel or allows for free spinning when in jog. HyperDeck Extreme Control replaces varispeed with a position function that allows rapid movement up and down the recording. The search dial uses twin bearings so you can free spin it for fast jog.Full Timecode Display and Deck StatusFull deck status is provided on a large timecode display. This display indicates the timecode of the current selected deck, and the timecode source switch will control what's displayed on the time counter. The horizontal light bar indicator allows the user to see the position of the search dial and provide a visual feedback, which is important when working with remote decks. The servo indicator light will show when the deck is in play or record mode and the servo system is correctly locked. Because remote decks will still display the time counter and transport state, the remote indicator will let you know if the deck is in remote. There's even external video reference status.Flexible In and Out Point Entry for EditingFor editing, you need to enter an in and out point for the remote deck. Simply select the "IN" or "OUT" button and the "ENTRY" button simultaneously to enter the points. To display each edit point on the time counter display, simply press the "IN" or "OUT" button only and the time the point will be shown. While the entry button is used for entering the in or out point data, you can also clear the in and out points by pressing the "IN" or "OUT" button while pressing "DELETE". To trim edit points, you can press the "TRIM" + or - button while pressing the "IN" or "OUT" button, and you will advance or delay the edit point by one frame at each press.Pre-Roll Edits to Cue DecksA pre-roll button is provided for cueing decks. When this button is pressed, the tape machine will run to the pre-roll point, which is generally five seconds before the in point. If you are using an older broadcast deck, it could take a few minutes for the deck to get to the cue point as the machine has to spool the tape. If the "PREROLL" button is pressed simultaneously with the "IN" or "OUT" button, then the deck will cue to the specific in or out point.Perform the Edit AutomaticallyOnce you have your in and out points set, you can perform the edit automatically by pressing the "EDIT" button. If this button is pressed before setting the in point, the current tape position will be automatically entered as the in point, and then the editing will be performed. This means you can select the "EDIT" button and it will set the in point and then perform the edit 

Key Features

• 1 x 3G-SDI Input
• 1 x HDMI and 1 x 3G-SDI Outputs
• Records ProRes, DNxHD, and H.264
• Records in H.264 SDI 4:2:2 10-Bit
• Front-Panel Buttons, Jog Wheel, LCD
• Timecode and Reference Input/Output
• 1/3 Rack-Mountable Form Factor
• USB Type-C, 1G Ethernet, RS-422

Take a compact broadcast-quality record/playback deck with you on location, in the studio, or built into a rack with the Blackmagic Design HyperDeck Studio HD Mini. The 1 RU tall recorder is 1/3 of a rack wide and powers from 100 to 240 VAC, or via an optional 12 VDC power supply for portability. Featuring one 3G-SDI input, one each HDMI and 3G-SDI output, and a USB Type-C webcam output, the recorder is flexible, enabling you to input, record, and output/stream simultaneously. Supporting both reference and timecode in/out, this unit fits perfectly into a broadcast environment, and you can use one recorder to create an ISO recording of each camera with perfect sync for live and post-production work.

Two SD card slots allow you to capture with virtually unlimited recording time, and the unit also supports recording to USB disks via the USB Type-C output port. The HyperDeck Studio HD Mini features a front-panel button control and a jog/shuttle wheel for an analog scrubbing feel. RS-422 control is supported for external control, and you can also control the unit using either the USB port or over Ethernet at 1G speeds for faster deck control and file transfers via the RJ45 connector. An integrated LCD on the front panel allows you to monitor the video.

Video InputsIt supports SD, HD, and select 3G signals over SDISupported Codecs

• ProRes: Apple ProRes 422 HQ QuickTime, ProRes 422 QuickTime, ProRes 422 LT QuickTime, ProRes 422 Proxy QuickTime.
• DNxHD: DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF for 720p and 1080p HD formats up to 60 fps
• H.264: H.264 SDI 4:2:2 10-bit, H.264 High 420 8-bit, H.264 Medium 4:2:0 8-bit, H.264 Low 4:2:0 8-bit for all progressive formats up to 1080p60

VTR-Style ControlsFeatures VTR-style front-panel controls for record and playback; a built-in jog/shuttle wheel provides analog-style control over your playbackRemoteThe unit is controllable via RS-422 control and over the Ethernet or USB portBuilt-In LCD MonitorThe unit's front panel also features a built-in LCD screen that allows you to monitor input or play back videoIncluded SoftwareThe HyperDeck Studio HD Mini includes Blackmagic OS and Blackmagic HyperDeck Setup

Key Features

• 8-Input 3G-SDI 1080p60 Live Switcher
• Redesigned Buttons and Layout
• Record Each Input to Separate Files
• Supports Remote Internet Cameras
• Streaming Support, USB & M.2 Recording
• Blackmagic Cloud Integration
• Up to 16 Multiview Output Sources
• Audio Mixing, Transitions, T-Bar, AUX
• Customizable Electronic LCDs
• Camera Control, Timecode, Talkback

Add an all-in-one live streaming switcher to your television studio, remote production, or live venue with the ATEM Television Studio HD8 ISO from Blackmagic Design. This compact, redesigned live TV switcher is a great fit to any streaming production, providing eight 3G-SDI inputs that support up to 1080p60

Key Features

• 8-Input 3G-SDI 1080p60 Live Switcher
• Redesigned Buttons and Layout
• Streaming Support, USB & M.2 Recording
• Blackmagic Cloud Integration
• Webcam Support, Runs Blackmagic OS
• Up to 16 Multiview Output Sources
• Audio Mixing, Transitions, T-Bar, AUX
• Customizable Electronic LCDs
• Studio Camera Control
• Timecode, MADI, Talkback

Key Features

• Control Panel for ATEM Switchers
• Large Info LCD with Rotary Encoders
• Soft-Touch Menu Buttons
• Programmable Color-Backlit Buttons
• LCD Scribble Strips for Buttons
• Weighted T-Bar
• Joystick for DVE and Camera Adjustment
• Control up to 20 Inputs

Blackmagic Design ATEM 1 M/E Advanced Panel Overview

The Blackmagic Design ATEM 1 M/E Advanced Panel is a full-featured hardware control panel for BMD ATEM switchers. It connects via Ethernet and provides hands-on tactile control, essential for broadcast studios. An LCD information display surrounded by soft-touch menu buttons and rotary encoders allows for intuitive programming of control functions. Aside from the main display, each programmable button has an LCD scribble strip to illustrate its function. Since buttons can perform different functions, up to 20 inputs can be accessed by shifting the 10 input buttons. The buttons themselves have curved indentations to help avoid incorrect keystrokes. Real-time dynamic controls are available in the form of a single 3-axis joystick and large weighted T-bar fader. Use the joystick to remotely control PTZ cameras or effects, and the T-bar to adjust transitions, wipes, fades, and more.

Key Features

• Supports 3G/HD-SDI at 10-Bit
• 10 x 3G-SDI Inputs, 6 x 3G-SDI Outputs
• Up to 16-Multiview Monitoring Windows
• Webcam Output via USB Type-C
• Frame Rate/Format Converter per Input
• 28-Channel Audio Mixer
• 4 x Upstream, 1 x Downstream Keyer
• Chroma/Luma Keyers
• Color/Pattern Generators
• Hardware or Software Mac/Windows Control

Powerful live event HD switching, supporting up to 10 individual 3G/HD-SDI inputs built into a 1 RU chassis, is at hand with the Blackmagic Design ATEM 1 M/E Constellation HD Live Production Switcher. Supporting 3G-SDI and HD-SDI signals, the switcher connects to a wide range of cameras and sources, delivering program output via six 3G-SDI BNC outputs or a webcam output via USB Type-C. In addition, the switcher has a multiview output with up to 16 routable windows that can display inputs, keyed video, graphics, and stills from the media pool, as well as the program output. Each input connects to a built-in Fairlight audio mixer supporting up to 28 channels of audio.

Key Features

• Supports NTSC/PAL/HD/UHD 4K at 10-bit
• Supports 4K Resolution over SDI or HDMI
• 1 x HDMI & 10 x 6G-SDI Inputs
• Tri-Sync/Black Burst Ref Sync Input
• 10 x Built-In Frame Synchronizers
• Multiview Monitoring in HD
• Program Outputs in UHD/HD/SD
• 4 x Keyers Total: 3 x Luma, 1 x Chroma
• 12-Channel Audio Mixer
• Hardware or Software Mac/Windows Control

The Blackmagic ATEM 1 M/E Production Studio 4K is a live event multicamera production switcher with 10 individual Ultra HD inputs built into a 1 RU chassis. Supporting NTSC/PAL/HD and Ultra HD video formats, the switcher connects to a wide range of cameras and sources, delivering a single program stream in UHD 4K, HD, or SD video. All this is done live and in real time with no rendering required. The switcher features a reference video input for synchronizing the switcher to other equipment using tri-level or black burst sync. Each input also features a frame synchronizer, which allows you to use cameras that do not feature genlock as well as input video from computer sources.

Key Features

• Panel for BMD ATEM Switchers
• High-Quality Buttons / Knobs / Controls
• 2 x M/E Rows with 20 x Buttons per Row
• 2 System Control LCDs, Control 4 M/Es
• 4 x Gigabit Ethernet Loop Output
• Custom Labeling, Redundant Power Supply
• 8 x On-Air Indicators, 20 x Cross Points
• 3-Axis Joystick, Keypad, 2 x Faders
• USB Type-C Input for Firmware Updates

The ATEM 2 M/E Advanced Panel is a highly sophisticated advancement of previous panel models as a companion to separately available professional ATEM switchers from Blackmagic Design. Using features such as high-quality buttons, knobs, fader bars, and a 3-axis joystick, you'll be able to customize the extensive panel to your precise needs.

Complex live productions require a versatile control panel, and the ATEM 2 M/E Advanced Panel allows you to customize, monitor, and switch your live broadcast events with features such as camera switching, executing transitions, fades, DVE effects, and it also sports 8 on-air indicators. The panel features two rows of M/E with 20 input buttons per row, two system control LCDs, independent LCDs for custom labeling of every row and button, 20 direct cross points, 40 shifted cross points, two preview transitions, and various DSK transition selectors such as Auto, Cut, and Tie/Preview.

The ATEM 2 M/E Advanced Panel connects to the switcher via 10/100/1000 BaseT Ethernet, and there are four Ethernet loop outputs for connecting to another panel or to a media-management computer. The panel receives firmware updates via its USB Type-C input.

Key Features

• Panel for ATEM Constellation Switcher
• 2 x M/E Rows, 30 x Input Buttons Each
• 3 x System Control LCDs for Each Row
• High-Quality Buttons/Knobs/Controls
• 4 x GbE Ethernet Ports with Loopouts
• Custom Labeling, Redundant Power Supply
• 12 On-Air Indicators, 30 Cross-Points
• 3-Axis Joystick, Keypad, 2 x Fader Bars
• USB Type-C Input for Firmware Updates

Blackmagic Design ATEM 2 M/E Advanced Panel 3... Overview

The ATEM 2 M/E Advanced Panel 30 is a sophisticated control interface for the separately available ATEM Constellation Switcher from Blackmagic Design. Use the numerous buttons, knobs, two fader bars, and a 3-axis joystick to customize your panel's program/preview operation.

ApplicationsDesigned for complex live productions, the ATEM 2 M/E Advanced Panel 30 enables you to customize, monitor, and switch your live broadcast events with features such as camera switching, executing transitions, fades, DVE effects, and 12 on-air indicators. The ATEM 2 M/E Advanced Panel 30 connects to your switcher via 10/100/1000 BaseT Ethernet and incorporates four Ethernet loop outputs for connecting to another panel or to a media-management computer.CompatibilityProvides pro switching controls for the ATEM Constellation HD line of switchers

Key Features

• Panel for ATEM Constellation Switcher
• 2 x M/E Rows, 40 x Input Buttons Each
• 4 x System Control LCDs for Each Row
• High-Quality Buttons/Knobs/Controls
• 4 x GbE Ethernet Ports with Loopouts
• Custom Labeling, Redundant Power Supply
• 12 On-Air Indicators, 40 Cross-Points
• 3-Axis Joystick, Keypad, 2 x Fader Bars
• USB Type-C Input for Firmware Updates

Blackmagic Design ATEM 2 M/E Advanced Panel 4... Overview

The ATEM 2 M/E Advanced Panel 40 is a sophisticated control interface for the separately available ATEM Constellation Switcher from Blackmagic Design. Use the numerous buttons, knobs, two fader bars, and a 3-axis joystick to customize your panel's program/preview operation.

ApplicationsDesigned for complex live productions, the ATEM 2 M/E Advanced Panel 40 enables you to customize, monitor, and switch your live broadcast events with features such as camera switching, executing transitions, fades, DVE effects, and 12 on-air indicators. The ATEM 2 M/E Advanced Panel 40 connects to your switcher via 10/100/1000 BaseT Ethernet and incorporates four Ethernet loop outputs for connecting to another panel or to a media-management computer.CompatibilityProvides pro switching controls for the ATEM Constellation HD line of switchers

Key Features

• Panel for ATEM Constellation Switcher
• High-Quality Buttons / Knobs / Controls
• 4 M/E Rows, 40 Input Buttons Each Row
• 24 Independent, 4 System Control LCDs
• 4 x Gigabit Ethernet Loop Output
• Custom Labeling, Redundant Power Supply
• 20 On-Air Indicators, 40 Cross Points
• 3-Axis Joystick, Keypad, 4 Fader Bars
• USB Type-C Input for Firmware Updates

Blackmagic Design ATEM 4 M/E Advanced Panel Overview

The ATEM 4 M/E Advanced Panel is a highly sophisticated advancement of previous panel models as a companion to separately available professional ATEM switchers such as the separately available ATEM Constellation Switcher from Blackmagic Design. Using the numerous buttons, knobs, four fader bars, and a 3-axis joystick, you'll be able to customize your panel's operation to your precise needs.

Complex live productions require a versatile, programmable control panel, and the ATEM 4 M/E Advanced Panel allows you to customize, monitor, and switch your live broadcast events with features such as camera switching, executing transitions, fades, DVE effects, and it also sports 20 on-air indicators. The panel features four rows of M/E with 40 input buttons per row, four system control LCDs, 24 independent LCDs for custom labeling, 40 direct cross points, 80 shifted cross points, four preview transitions, and various DSK transition selectors such as Auto, Cut, and Tie/Preview.

The ATEM 4 M/E Advanced Panel connects to the switcher via 10/100/1000 BaseT Ethernet, and there are four Ethernet loop outputs for connecting to another panel or to a media-management computer. The panel receives firmware updates via its USB Type-C input.

Key FeaturesTri-color LED cross point buttons, 40 direct cross points, and 80 shifted cross pointsFour M/E rows, 40 input buttons per rowFour system control LCDs for each row and 24 LCDs for customizing labels for each button on every rowFader bar, 3-axis joystick, numeric keypad20 on-air indicatorsFour transition previews with transition rate displayCompatible Operating SystemsmacOS 10.14 Mojave, 10.15 Catalina or later
Windows 10, 64-bit

Key Features

• Supports 3G/HD-SDI at 10-Bit
• 40 x 3G-SDI Inputs, 24 x 3G-SDI Outputs
• Up to 16-Multiview Monitoring Windows
• Webcam Output via USB Type-C
• Frame Rate/Format Converter per Input
• 156-Channel Audio Mixer
• 16 x Upstream, 4 x Downstream Keyer
• Chroma/Luma Keyers
• Color/Pattern Generators
• Hardware or Software Mac/Windows Control

Powerful live event HD switching, supporting up to 40 individual 3G-/HD-SDI inputs built into a 2 RU chassis, is at hand with the Blackmagic Design ATEM 4 M/E Constellation HD Live Production Switcher. Supporting 3G-SDI and HD-SDI signals, the switcher connects to a wide range of cameras and sources, delivering program output via 24 3G-SDI BNC outputs or a webcam output via USB Type-C. In addition, the switcher has four multiview outputs with up to 16 routable windows that can display inputs, keyed video, graphics, and stills from the media pool, as well as the program output. Each input connects to a built-in Fairlight audio mixer supporting up to 156 channels of audio.

The switcher features a reference video input, and each input features a frame synchronizer, frame rate converter, and format converter. This allows you to mix and match cameras, formats, cameras that do not feature genlock, and video input from computer sources. Upstream and downstream keyers and effects are supported. All this is done live and in real time with no rendering required. You can control the switcher using the integrated front panel, optional Blackmagic ATEM panels, or via the downloadable control software.

Broadcast-Quality TransitionsThe ATEM Constellation HD includes a wide range of broadcast-quality native transitions such as mix, dip, wipe, and more. All transitions can be customized in the system control menus with adjustments for border color, border width, position, direction, and a lot more. The ATEM Constellation switcher includes a powerful digital video effects processor for DVE transitions, which can be used to squeeze the current picture offscreen revealing a new video under it. The DVE can even be used to create graphic wipe transitions. To eliminate errors, ATEM Constellation HD features a preview transition feature so you can set up your transitions before you switch it on air.Built-In DVEThe ATEM Constellation features four independent DVEs that let you reposition graphics and create picture-in-picture compositions. You get amazing quality and the DVE supports position, resize, and scale, all in real time. The DVE lets you create professional picture-in-picture effects with customizable 3D borders, shadows, and lighting. DVEs can also be used to create amazing DVE transitions with squeeze and swoosh effects for adding excitement to your programming. You can even combine DVE transitions with custom graphics to create your own graphic wipe transitions. The 4 M/E model includes SuperSource processors for eight DVEs, creating a total of 12 DVEs.SuperSourceIn addition to the DVEs in the M/E rows, the 4 M/E model includes powerful SuperSource multilayer processors with eight extra DVE layers plus a background layer, all appearing to ATEM Constellation HD as an additional input source. Any switcher video input can be used for each SuperSource DVE, then it's all layered together over a media pool custom background. SuperSource is just like having an extra multilayer VFX switcher built in. SuperSource is perfect for doing picture-in-picture displays for interviews because you can set up the effect while keeping the main DVEs free for other tasks.MultiviewConfigurable to 16, 13, 10, 7, or 4 up view, it includes monitoring of program, preview, inputs, media players, DSK, and clean feed with optional labels and audio meters. The 4 M/E model features four multiview outputs.

Key Features

• Supports 10-Bit NTSC/PAL/HD/UHD 4K
• Supports 4K Resolution over SDI or HDMI
• 4 x 6G-SDI & 4 x HDMI Inputs (4K/HD/SD)
• Tri-Sync/Blackburst Ref. Sync Input
• 8 x Built-In Frame Synchronizers
• Multiview Monitoring in HD
• Program Outputs in SD/HD/4K HD
• 1 x Upstream & 2 x Downstream Keyers
• Audio: 10 x Input, 2-Channel Mixer
• Hardware or Software Mac/Windows Control

The Blackmagic ATEM Production Studio 4K Live Switcher is a live event multicamera production switcher with eight individual Ultra HD inputs built into a 1 RU chassis. Supporting NTSC/PAL/HD and Ultra HD video formats via four Single-Link 6G-SDI and four 4K HDMI inputs, the switcher connects to a wide range of cameras and sources, delivering a single program stream in SD, HD, or UHD 4K video. All this is done live and in real time with no rendering required.

Key Features

• 4-Channel Live Stream 3G-SDI Switcher
• Input/Output up to 1080p60 10-Bit 4:2:2
• 2-Channel Digital Audio Mixer
• 2 x 3G-SDI Output, Ethernet ATEM Control
• Media Player, Computer Input Support
• Upstream and Downstream Keyers
• DVE Transition, Chroma/Luma Keyers
• Color and Pattern Generators
• USB Type-C Streaming/Webcam Output

esigned for multicamera live streaming to the internet or broadcast applications, the compact ATEM SDI from Blackmagic Design provides gaming consoles, corporate computer streams, or HD cameras a four-input live-production switcher with an integrated control panel. The four SDI inputs are available on the rear of the chassis and they input up to 1080p60 video. Two 3G-SDI outputs are useful for a projector or external monitor, a USB Type-C output for streaming up to 1080p60 video to a computer, and an RJ45, 10/100 Ethernet port for system management, remote control, and upgrades.

Key Features

• Up to 1080p60 via 3G-SDI BNC
• 1-Touch Keying, Advanced Compositing
• SD/HD/3G-SDI Support
• Works with Ultimatte Smart Remote 4
• 5 x SDI Inputs & Loop Outputs
• Dedicated Compositing Inputs & Outputs
• Realistic Augmented Reality with Tinting
• Advanced Algorithms and Color Science
• Better Color Fidelity/Edges/Transitions
• 1 RU Height, Half-Rack Width

Key Features

• Routing Switcher
• 48 Programmable Buttons
• 10 Programmable Macro Buttons
• 1 RU Rackmount Size
• Push Buttons on Front Panel
• RS-422 Input and Output
• Ethernet with PoE for Remote Control
• Videohub Control Software Included

Blackmagic Design Videohub Overview

The Videohub Smart Control Pro from Blackmagic Design is a network switching router with 48 programmable buttons for routing sources and destinations over a network. Housed in a 1 RU frame, the Smart Videohub is suitable for use in both large broadcast systems or portable racks for routing live productions over Ethernet.

Simple push buttons on the front of the unit are configured to control source and destination as well as 10 assignable macro buttons and several configuration buttons. The buttons can be programmed via USB using the included software for Mac OS X and Windows. The unit also features power fail protection to preserve your button configurations when power is lost.

The rear of the unit features an RJ45 Ethernet input with PoE to connect your sources and power the unit, or it can be powered with a separately available C13 power cable. There is also an Ethernet loop output without PoE to communicate with your destinations. Two RS-422 input and output ports for future implementation are also on the back as well as a USB Type-C port for software configuration and firmware upgrades.

Key Features

• Supports 3G/HD-SDI at 10-Bit
• 20 x 3G-SDI Inputs, 12 x 3G-SDI Outputs
• Up to 16-Multiview Monitoring Windows
• Webcam Output via USB Type-C
• Frame Rate/Format Converter per Input
• 48-Channel Audio Mixer
• 8 x Upstream, 2 x Downstream Keyer
• Chroma/Luma Keyers
• Color/Pattern Generators
• Hardware or Software Mac/Windows Control

Powerful live event HD switching, supporting up to 20 individual 3G/HD-SDI inputs built into a 1 RU chassis, is at hand with the Blackmagic Design ATEM 2 M/E Constellation HD Live Production Switcher. Supporting 3G-SDI and HD-SDI signals, the switcher connects to a wide range of cameras and sources, delivering program output via 12 3G-SDI BNC outputs or a webcam output via USB Type-C. In addition, the switcher has two multiview outputs with up to 16 routable windows that can display inputs, keyed video, graphics, and stills from the media pool, as well as the program output. Each input connects to a built-in Fairlight audio mixer supporting up to 48 channels of audio.

The switcher features a reference video input, and each input features a frame synchronizer, frame rate converter, and format converter. This allows you to mix and match cameras, formats, cameras that do not feature genlock, and video input from computer sources. Upstream and downstream keyers and effects are supported. All this is done live and in real time with no rendering required. You can control the switcher using the integrated front panel, optional Blackmagic ATEM panels, or via the downloadable control software.

Key Features

• Supports HD/UltraHD 4K @ 10-bit
• 20 x 12G-SDI Inputs
• Tri-Sync/Blackburst Ref. Sync Input
• Built-In Frame Synchronizers
• Two Independent Multi-View Outputs
• Program Outputs in HD/4K HD
• 16 Upstream & 2 Downstream Keyers
• 24-Input x 2-Channel Audio Mixer
• Hardware or Software Mac/Windows Control

Blackmagic Design ATEM 4 Overview

The Blackmagic Design ATEM 4 M/E Broadcast Studio 4K is a live switcher designed for HD and UHD 4K broadcast productions. Twenty 12G-SDI inputs support UHD 4K video up to 59.94 fps, and are backward compatible with 1080p, 1080i, or 720p sources as well (inputs do not feature scaling, so all sources must be of the same resolution). All inputs are frame synchronized, so non-genlocked sources can be used. Audio is supported via all SDI inputs plus 2 sets of dedicated analog stereo inputs via XLR and RCA. For in-the-box mixing, connect a computer running ATEM software control, and have immediate control of all audio channel inputs. Connections for timecode, reference, and control are also available. SDI outputs are available for program and preview, and they can operate at either HD or UHD resolutions, just like the inputs. Two preview outputs allow you to spread your multi-view over two displays.

Like its namesake, the ATEM 4 M/E Broadcast Studio 4K features four mix-effects buses for creating advanced effects to boost production value. Within each mix-effects bus, there are 4 built-in upstream keyers, for a total of 16 keyers, enabling your production to take advantage of many video and graphics layers simultaneously. Two downstream keyers for bugs, logos, and global lower-thirds are also available. The built-in DVE processing lets you adjust video streams with control over size and rotation, plus, 3D borders, drop shadows, and lighting effects are also available.

Other connectivity includes Ethernet for adding control surfaces, or for remote control over a network. USB connectivity allows for the ATEM switcher's firmware to be updated in the future, and for internal settings. The entire chassis of the ATEM 4 M/E Broadcast Studio 4K fits inside a standard 19" equipment rack, only requiring 2 RU of space. Internal redundant power supplies require separately available standard IEC cables for power.

Key Features

• For Studio Camera 4K Pro
• Single 10G Ethernet Cable to Camera
• Powers Camera via PoE
• Breakout of Video, Audio & Talkback

Key Features

• Supports DCI 8K, 8K, DCI 4K, UHD, 2K, HD
• Accepts Third-Party Calibration Probes
• On-Screen Scopes
• 12G-SDI I/O and HDMI Outputs
• Auto-Convert 2SI and Square Division
• Supports HDR Workflows
• Supports 33-Point 3D LUTs
• Front-Panel Interface

Blackmagic Design Teranex Mini Overview

The Blackmagic Design Teranex Mini SDI to HDMI 8K HDR is more than just a basic converter, it is also an advanced 8K monitoring solution. The four 12G-SDI inputs support 4K signals independently and can be ganged together to support an 8K input signal, either DCI 8K or 8K video split into four UHD signals. It can use third-party calibration probes such as the SpectraCal C6, X-Rite i1 Display Pro, or the Klein K10-A probe to accurately align connected displays for precise color. The built-in LCD screen displays not only the video image, but it can also display two on-screen scopes that can be selected between WFM, Parade, Vector, and Histogram.

The 8K is available on the four SDI outputs, or via the four HDMI outputs for monitors that support quad HDMI inputs. If you are not connected to an 8K monitoring solution, a built-in down-converter enables you to display the 8K input video on an Ultra HD or HD monitor. The unit will convert between 2SI and square division automatically. The Mini SDI to HDMI 8K HDR solution supports a variety of HDR workflows, including, PQ and HLG, and it supports both Rec. 202 and Rec. 709 as well as 100% of the DCI-P3 format. Two independent 3D LUTs can be loaded at the same time, and you can switch between them from the unit's front panel. In addition to the LCD video screen, the front of the unit features a rotating selection knob and six front-panel buttons for navigating the unit.

The quad-link 12G-SDI inputs have outputs for looping to other equipment. In addition, all HD, Ultra HD, and 8K standards are supported, allowing broadcast or film industry use. With 2SI to square division conversion built-in, an 8K source will be automatically converted for the monitor. Teranex Mini SDI to HDMI even handles both Level A or B 3G-SDI plus YUV and RGB SDI formats.The Blackmagic Design Teranex Mini SDI to HDMI 8K HDR can use third-party calibration probes (not included) such as the SpectraCal C6, X-Rite i1 Display Pro, or the Klein K10-A probe to accurately align connected displays for precise color. Just connect the probe to the unit via the USB Type-C connector on the front panel, and start the calibration process in the menu.The front-panel LCD provides confidence monitoring with both images and accurate audio level meters. There are menus for all functions and it's easy to scroll through the menu pages to find settings that need changing. The 3D LUTs can be enabled just by pressing the 1 or 2 buttons. Calibration is also started via the menus and you simply follow the prompts to calibrate your display. The audio meters can even be switched between VU or PPM ballistics. HDMI instant lock can be enabled to ensure the HDMI display locks instantly if the input video is interrupted. There are settings for configuring scopes, their on-screen location, or opacity. You can even view and edit network settings.Teranex Mini SDI to HDMI 8K HDR includes the same high-quality, 33-point 3D LUTs as used in the film industry. 3D LUTs are perfect for recreating the look of old-style film stocks, or they can be used to compensate for the colorimetry of the connected display. You can calibrate the connected display by connecting a third-party USB color probe, and Teranex Mini SDI to HDMI 8K HDR will analyze the monitor and generate a 3D LUT to correct for color differences between displays. Two independent 3D LUTs can be loaded and you can select between them from the front panel. Plus, 3D LUTs use standard file formats so you can load LUTs generated by software such as DaVinci Resolve.

Key Features

• Supports NTSC/PAL/HD/UltraHD 4K @ 10-bit
• Supports 4K Resolution Over SDI or HDMI
• 20 x 6G-SDI & 1 x HDMI Inputs
• Tri-Sync/Blackburst Ref. Sync Input
• 10 x Built-In Frame Synchronizers
• Two Independent Multi-View Outputs
• Program Outputs in SD/HD/4K HD
• 4 Upstream & 2 Downstream Keyers
• 22-Input Audio Mixer
• Hardware or Software Mac/PC Control

The ATEM 2 M/E Production Studio 4K from Blackmagic Design is a live event multi camera production switcher with 20 video inputs built into a 2RU chassis. Supporting NTSC/PAL/HD and Ultra HD 4K (3840x2160) video formats, the switcher connects to a wide range of cameras and sources, delivering a single program stream in SD, HD, or Ultra HD video. All this is done live and in real time with no rendering required. The switcher features a reference video input for synchronizing the switcher to other equipment using tri-level or blackburst sync. Each input also features its own frame synchronizer, which allows you to use cameras that do not feature Genlock as well as input video from computer sources.

The switcher provides 20 6G-SDI video inputs and one 4K HDMI input, which shares a channel with one of the 6G-SDI inputs. Outputs include three 6G-SDI Program outputs, one HDMI Program output, six 6G-SDI auxiliary outputs. All inputs and outputs are SD/HD/UHD switchable, with the exception of dedicated down-converted HD Program output for monitoring UHD footage on an SDI-equipped HD monitor. Two independent multi-view outputs are available, in both SDI and HDMI, so you can monitor up to 16 cameras across two screens.

• Mix and Match up to Four 1080p60 Signals
• Scaled HDMI PGM and USB Streaming Output
• PiP/PbP and Transition Effects
• HDMI and 2" Color Display Preview
• Independent 3.5mm Audio I/O
• RJ45 Port for LAN/Software Control
• H.265 Compression

RGBlink Mini Overview

The RGBlink mini Streaming Switcher, in a portable design with common controls, a T-bar, and a display screen, allows you to switch between four HDMI signals and output them over an HDMI PGM and USB 3.0 live streaming outputs, with PiP and transition effects applied. The live streaming output lets you connect to popular UVC platforms such as OBS and YouTube Live. The HDMI inputs are resolution independent, allowing you to mix and match formats up to 1080p60/WUXGA. The signals are automatically scaled to the assigned resolution up to 1080p60 for uniform output in virtually all types of live productions. (For DSK, logo, chroma key, and PTZ camera support, please check out the mini+ switcher.)

Besides the HDMI PGM/PVW output, you can also monitor all four inputs via the built-in 2" color TFT display. Additionally, 3.5mm audio input and output ports let you embed an independent mic signal and extract HDMI audio to external speakers or an audio mixer. The compact switcher also offers an RJ45 port for connecting to a LAN for remote control of the mini via optional software.

Additional FeaturesButton or T-bar switchingT-bar calibrationPicture-in-Picture (PiP) and Picture-by-Picture (PbP) presetsFree downloadable dedicated Windows/macOS XPOSE software with test pattern, password protection, and more

H.265 compression

• Packaging Details: Packaging Info Package Weight 2.39 lb Box Dimensions (LxWxH) 10.1 x 5.8 x 3.5"

Key Features

• 4-Input Video Production System
• 4 x HDMI Inputs, up to 1080p60 In/Out
• HDMI PGM/PST Output, USB 3.0 to Computer
• Built-In 5.5" LCD Touchscreen Display
• 3.5mm Audio In/Out
• Supports up to 1080p60 Video In/Out
• 4-Channel Picture-in-Picture Preview
• 1/4"-20 Mounting Thread

Live-switch, control, and stream up to four HDMI video sources such as PTZ cameras with transitions and effects using the HDMI Live Stream Switcher with Built-In 5.5" LCD Monitor from FeelWorld. The compact video switcher can switch up to four HDMI inputs, output program and preview video via one HDMI port, and stream up to 1080p60 video via USB with third-party streaming software. You can view up to six pictures on the 5.5" touchscreen display, including the four individual inputs, PGM preview, and PST preview.

The switcher allows you to switch between the inputs using the touchscreen or the large LED buttons that light up with green or red tally indicators, or it can be controlled via a computer or smartphone app. You can utilize the HDMI embedded audio or embed audio from a microphone or external source using the 3.5mm stereo input jack. There is also a 3.5mm output jack to de-embed the audio for use with external speakers or an audio mixer. You can monitor all four inputs using the built-in color TFT display on the unit, or you can output Program/Preview via the HDMI output. It supports video output up to 1080p60 via USB for use with a variety of third-party streaming software or NLE video editing systems.

Key Features

• 40 Gbps Thunderbolt 3 & PCIe I/O
• Advanced 4K 60p RGB/Stereoscopic Ingest
• 12G-SDI, HDMI 2.0, Analog Connections
• 4-Ch XLR and 2-Ch AES/EBU Audio
• Reference, Timecode, RS-422 Ports
• 4:4:4 Sampling
• Real-Time H.265 Encoding
• LCD Preview Screen
• Wide Mac/Windows Software Compatibility
• 2 RU Form Factor; Dual Built-In PSUs  
• Blackmagic Design 4K Extreme Overview

A faster upgrade to its predecessor, the UltraStudio 4K Extreme, Blackmagic Design UltraStudio 4K Extreme 3 is built with a Thunderbolt 3 interface, which features a 40 Gbps transfer rate that better supports 4K ingest when working in RGB or stereoscopic formats. The super high speed of Thunderbolt 3 is fast enough for the highest bit depth HDR uncompressed RGB 4K and stereoscopic formats, such as those used for high end feature films. Like the previous model, UltraStudio 4K Extreme 3 still offers PCIe, 12G-SDI, HDMI 2.0, and analog connections, 4:4:4 sampling, and real-time H.265 encoding. It supports 4K DCI and UHD footage in up to 60 fps.

UltraStudio 4K Extreme 3 has a 2 RU rackmountable form factor with the primary connectivity on the back panel. For local monitoring, it offers an LCD preview screen and basic controls on the front panel.

UltraStudio 4K Extreme 3 can be useful for non-linear editing applications, on-set acquisition, VFX, audio post-production, live-streaming, color-grading, live-production applications, and more.

Two SD cards are included with the device that feature the following Blackmagic applications: Media Express, Disk Speed Test, LiveKey, Blackmagic Desktop Video Utility and Blackmagic driver on Mac OS X/Windows 7, 8, and 10/Linux, and DaVinci Resolve (formerly known as DaVinci Resolve Lite).

40 Gbps Thunderbolt 3 InterfaceUltraStudio 4K Extreme 3 has all the same powerful features of UltraStudio 4K Extreme, but in addition has a Thunderbolt 3 interface capable of up to 40 Gbps transfer speeds over a single cable.Advanced 4K 60p Capture & PlaybackUltraStudio 4K Extreme 3 features 12G-SDI and HDMI 2.0 connections for working with large 60 fps, 12-bit, 4K files. A built-in hardware encoder can convert video in real-time to H.265, which is the distribution format for Ultra HD. Offering a very wide range of analog and digital connections, UltraStudio 4K Extreme 3 can be used with virtually any camera, deck, router, or display.Analog and Digital ConnectionsUltraStudio 4K Extreme 3 features Thunderbolt 3, super-fast 12G-SDI with loop outputs, HDMI 2.0, analog component, 4-channel XLR audio, 2-channel AES/EBU audio, reference, timecode, and RS-422 serial deck control connections. It's also designed with two optical fiber cages and a PCIe connection for expansion.12G-SDIThe fast speed of 12G-SDI means UltraStudio 4K Extreme 3 can support both capture and playback of Ultra HD and 4K 60p over a single BNC cable. Because the 12G-SDI connections are multi-rate, you can still connect to all your existing equipment. UltraStudio 4K Extreme 3 even supports dual link 12G-SDI so you can do stereoscopic and simultaneous fill and key all in real time.Style and DurabilityThe elegant front panel has an integrated color LCD and easy-access video and audio input buttons.

• Packaging Details: 4.500 kg

Key Features

• 12G-SDI & HDMI 2.0 Input/Output
• 1 x 40 Gb/s Thunderbolt 3 Interface
• 3" LCD Status/Preview Screen
• DCI 4K60 4:2:2 Single-Link 12G-SDI I/O
• DCI 4K30 4:4:4 Single-Link 12G-SDI I/O
• DCI4K60 4:4:4 via HDMI
• 8-, 10- & 12-Bit Processing
• 2K/HD/SD via SDI or HDMI
• RS-422 Deck Control
• macOS, Windows & Linux Compatible

Blackmagic Design 4K Mini Overview

The UltraStudio 4K Mini Thunderbolt 3 from Blackmagic Design links your Thunderbolt 3 computer to any of a variety of video components for capture, playback, or streaming. This portable unit captures up to DCI 4K60 4:2:2 via single-link 12G-SDI or up to DCI 4K30 4:2:2 video via HDMI. Record 12-bit High Dynamic Range (HDR) footage at rates up to DCI 4K30 and 8-/10-bit video at rates up to DCI 4K60.

A built-in LCD screen enables you to monitor your signal, and an SD card reader provides instant access to your SD media. The compact UltraStudio 4K Mini's Thunderbolt 3 interface offers lightning-fast connections and will trickle-charge a connected computer. Audio features include 16-channel SDI and 8-channel HDMI embedded input and output, a 3-pin XLR audio input, and a headphone output.

The UltraStudio Mini 4K Thunderbolt 3 supports both compressed and uncompressed video, is Windows, macOS, and Linux compatible, and supports most popular codecs. The UltraStudio 4K Mini also supports 3D capture and playback via HDMI, plus 3D SDI playback at rates up to DCI 4K30. The free version of DaVinci Resolve and the additional software are included via a QR code download. Power the UltraStudio Mini 4K Thunderbolt 3 via its internal 100-240 VAC adapter.

Thunderbolt 3 ConnectivityLightning-fast Thunderbolt 3 connection with 45W power out for charging a connected laptopSupports up to DCI 4K60 Video8/10/12-bit HDR capture and playback with multi-rate support from SD to DCI 4K60Compact DesignPortable design with front-panel control buttons, LCD with video, audio, and status information, XLR mic input, and an SD card slotSupported SoftwareIncluding but not limited to:

 

• DaVinci Resolve
• Fusion
• Final Cut Pro X
• Adobe Premiere Pro CC
• Avid Media Composer
• Adobe After Effects CC
• Avid Pro Tools
• Steinberg Cubase
• Steinberg Nuendo
• Adobe Photoshop CC

Included SoftwareMacOS & Windows

• DaVinci Resolve, Media Express
• Disk Speed Test, LiveKey
• Blackmagic Desktop Video Utility
• Blackmagic driver

Linux

• Media Express
• Blackmagic Desktop Video Utility
• Blackmagic driver

• Packaging Details: 1.503 kg

Key Features

• Simultaneous SDI to HDMI & HDMI to SDI
• 1 x SD/HD/12G-SDI & 1x HDMI Input/Output
• Supports up to DCI/UHD 4K60 Video
• Blackmagic Camera Control, Tally Support
• SDI Re-Clocking/HDMI Timecode
• HDMI Copy Protection Support
• Automatic Input Signal Detection
• Embedded HDMI & SDI Input/Output
• LED Video & Power Signal Indicators
• A Power Supply Is Included

Blackmagic Design Micro Converter Overview

Easily combine SDI and HDMI components in your video setup with the Micro Converter BiDirectional SDI/HDMI 12G from Blackmagic Design. This compact bidirectional converter can convert SDI to HDMI and HDMI to SDI in all SD, HD, and UHD formats up to 2160p60. Since each conversion direction can be a different SD, HD, or UHD video standard, it's like getting two converters in one. It also offers camera control conversion for Blackmagic HDMI cameras like the Pocket Cinema Camera 4K or 6K, enabling you to use them with an SDI-based live switcher.

The pocket-sized Micro Converter BiDirectional SDI/HDMI 12G features HDMI timecode support, SDI re-clocking for stability over long cable runs, support for a wide range of pro broadcast resolutions, including cine-style 48 fps, and both HDMI and SDI embedded audio input and output. This converter features a sturdy metal housing with power and signal LED status indicators and rugged connector interfaces. A USB Type-C port enables the converter to easily connect to and be powered by large-screen monitors, laptops, desktop computers, or projectors. A power supply and an international plug adapter set are included with the converter.

FeaturesBidirectional Format ConversionYou can convert SDI to HDMI and HDMI to SDI in all SD, HD, and UHD formats up to 2160p60. Each conversion direction can be a different SD, HD, or UHD video standard, so it's like getting two converters in one.Compact, Rugged Design

• Robust metal housing and rugged connectors
• USB Type-C port for powering via a compatible component like a monitor or laptop
• Updatable via the USB Type-C port and your Mac or Windows computer

HDMI Camera Control

• Camera control conversion for the HDMI-output Blackmagic Pocket Cinema Camera 4K or 6K, enables use with an SDI-based live switcher

SDI & HDMI Timecode

• HD and SD timecode support
• Converts HDMI timecode to SDI and vice versa

SDI Re-Clocking

• Built-in re-clocking on 3G-SDI output enables stable output over longer cable runs
• Compatible with SMPTE 259M/292M/296M/424M/425M level A and B

Wider Resolution Support

• SDI support from NTSC and PAL up to DCI/UHD 4K60
• HDMI support from NTSC and PAL up to DCI/UHD 4K60

Embedded Audio

• Supports embedded SDI and HDMI input and output

LED Indicators

• LED indicators for video and power signals

Versatile Power Options

• Power from a monitor, laptop, or other component using the USB Type-C port
• Power supply and international plug adapter set are included

Key Features

• Compact HDMI Video Switcher
• 4 x HDMI 2.0 Inputs, Input up to 4K60
• Stream up to 1080p60 Video via 2 x USB
• PTZ Control, Chroma Key, Logo, PiP
• Audio Insertion and Extraction
• Transitions, Auto-Cut, Manual Switching
• Live Input Program Preview on Display
• Multiview and PGM HDMI Output
• H.265 Compression Support
• LAN Control via Software

Overview

Live-switch, control, and stream up to four HDMI video sources such as PTZ cameras with transitions and effects using the mini-pro Video Switcher from RGBlink. The compact mini-pro video switcher can input up to 4K60 video via four HDMI 2.0 inputs, output program and preview video via one HDMI port, record external video via one USB 2.0 output, and stream up to 1080p60 H.265 video via USB 3.0 with third-party streaming software. The switcher allows you to control PTZ cameras and supports the use of chroma keying and the addition of graphics logos to your video feed.

The mini-pro allows you to switch between the inputs by touching the button sources, auto-switching, via software, or using the T-bar with preset FX transitions. You can utilize the HDMI embedded audio, or you can embed audio from a microphone or external source using the 3.5mm stereo input jack. There is also a 3.5mm output jack to de-embed the audio for use with external speakers or an audio mixer.

You can monitor all four inputs using the built-in color TFT display on the unit, or you can output program/preview via the HDMI output. The mini-pro supports video output up to 1080p60 via two USB outputs for use with a variety of third-party streaming software or NLE video editing systems, allocating one for streaming and one for externally recording your program. The RJ45 port allows you to connect to a LAN for software control of the mini-pro. The unit is powered using its USB Type-C input.

Key FeaturesFour HDMI inputs, one USB 3.0 Type-A streaming output, one USB 2.0 Type-A recording output, one HDMI program outputInput up to DCI 4K60 video via HDMISeamless switching between inputsCreate effects with transitions when switching between sourcesInsert audio via 3.5mm audio input or use HDMI embedded audioSwitch between sources with T-bar or direct touchRemote control with apps connected via LANAdd Picture-in-Picture (PiP) presetsPreview all video inputs simultaneously via HDMI monitoring or the TFT color display on the switchStream video up to 1080p60 to popular platforms via USBRecord up to 1080p video to external drive via USB Type-A outputDe-embed and extract audio to speakers or mixer via 3.5mm stereo outputAdvanced features for PTZ camera, chroma key, and adding a graphic logo

Input

• Packaging Details: Packaging Info Package Weight 2.3 lb Box Dimensions (LxWxH) 10.1 x 5.9 x 3.4"

Key Features

• Broadcast-Quality Recording
• 1-Lane PCIe Slot Card (for 1-16 Lanes)
• SDI and HDMI Inputs
• Supports up to 2K DCI over SDI
• Up to 1080p60 Resolution Support in HDMI
• 8-, 10-, 12-Bit Video, 4:2:2 / 4:4:4
• REC 601/709 Color Space Support
• Mac, Windows, and Linux Compatible

Blackmagic Design Mini Recorder HD Overview

Record HD video over SDI or HDMI with the Blackmagic Design DeckLink Mini Recorder HD. This 1-lane PCIe slot playback card with SDI and HDMI inputs is, compatible with 1-, 4-, 8-, and 16-lane PCIe slots, allowing you to capture up to DCI 2K video over SDI, and HD video over HDMI 2.0.

The card is compatible with such software packages as Wirecast, vMix, and OBS. In addition, the card supports hardware-based real-time color space conversion. The card also automatically switches between SD and HD formats, so it'll handle all common video formats as well as HDR.

Note:For use on a Mac, a Mac Pro is required with PCI Express slots.PCIe CompatibilityPCIe 1-lane card, compatible with 1-, 4-, 8-, and 16-lane PCIe slots on Mac, Windows, and Linux (for use on a Mac, a Mac Pro is required with PCI Express slots)Supported Software Applications

• Wirecast
• vMix
• OBS
• Cinergy Capture Pro
• DevTek EasyMediaSuite
• Glookast Capturer
• Livestream Producer
• Metus Ingest
• Softron MovieRecorder
• ToolsOnAir just:in
• Burst Video WebClip2Go & [REC]Marker
• Zoom

Supported Codecs

• AVC-Intra
• AVCHD
• Canon XF MPEG2
• Digital SLR
• DV-NTSC
• DV-PAL
• DVCPRO50
• DVCPROHD
• DPX
• HDV
• HEVC
• XDCAM EX
• XDCAM HD
• XDCAMHD422
• DNxHR & DNxHD
• AppleProRes 4444
• Apple ProRes 422 HQ
• Apple ProRes 422
• Apple ProRes 422LT
• Apple ProRes 422 Proxy
• Uncompressed 8-bit 4:2:2
• Uncompressed 10-bit 4:2:2
• Uncompressed 10-bit 4:4:4

Hardware Frame Bufferv210 (10-bit YUV), 2vuy (8-bit YUV), ARGB, BGRA (8-bit RGB), r210 (10-bit RGB), R12B, R12L (12-bit RGB)

• Packaging Details: 0.130 kg

ConnectionsSDI Video Inputs

1 x SD, HD or 3G-SDI.

SDI Video Outputs

1 x SDI loop out.

HDMI Outputs

HDMI Type A out.

Multi Rate Support

Auto detection of SD or HD.

Updates, Configurations and Power

USB Type‑C.

StandardsSDI Video Standards

525i59.94 NTSC, 625i50 PAL

HD Video Standards

720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60
1080PsF25, 1080PsF29.97, 1080PsF30
1080i50, 1080i59.94, 1080i60
2Kp23.98 DCI, 2Kp24 DCI, 2Kp25 DCI, 2Kp29.97 DCI, 2Kp30 DCI, 2Kp47.95 DCI, 2Kp48 DCI, 2Kp50 DCI, 2Kp59.94 DCI, 2Kp60 DCI
2KPsF25 DCI, 2KPsF29.97 DCI, 2KPsF30 DCI

SDI Compliance

SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M

SDI Video Rates

SDI video connections are switchable between standard definition, 720p, 1080i, 1080p and DCI high definition.

SDI Color Precision

4:2:2

SDI Color Space

YUV

SDI Auto Switching

Automatically detects SD, HD and level A or B for 3G‑SDI.

HDMI Video Standards

525i29.97 NTSC, 625i25 PAL
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60

HDMI Color Precision

4:2:2. A 17 point LUT can be loaded via the software utility for calibrating or improving monitor color.

HDMI Color Space

YUV

The world’s smallest 12G-SDI to HDMI broadcast quality converter! Blackmagic Micro Converter SDI to HDMI 12G is a miniaturized broadcast quality video converter that’s been specifically designed for professional monitoring. It includes a 33 point 3D LUT for color calibrating any monitor, projector or television. Micro Converters feature full size HDMI and professional 12G-SDI connections for working with all NTSC, PAL, 720p, 1080p, 1080PsF, 1080i and 2160p rates, including 4K DCI at 24/47.95/48. You can power it over USB from a television or a mobile phone charger!

Key Features

• Single Link SD/HD/3G/6G-SDI Input
• 8x Single Link SD/HD/3G/6G-SDI Outputs
• Re-Clocked Outputs
• Supports SD, HD, UHD 4K & DCI 4K Signals
• Automatic Input Signal Detection
• Ancillary Data & Embedded Audio
• Supports ASI Signals
• Control via DIP Switches or Software
• USB 2.0 Port for Firmware Updates
• 12V Universal Power Supply Included

Blackmagic Design Mini Converter Overview

The Mini Converter SDI Distribution 4K from Blackmagic Design allows you to distribute a Single Link SD/HD/3G/6G-SDI signal to eight SDI devices simultaneously. It automatically detects the input signal type, re-clocks it, and its eight outputs automatically match the SDI input video format. With a compact form factor and easy-to-use controls, the Mini Converter is ideal for a variety of broadcast, post production, and professional AV applications.

Using 6G-SDI technology, the Mini Converter supports resolutions up to Ultra HD 4K (3840 x 2160) at up to 30 fps and DCI 4K (4096 x 2160) at 24 fps, as well as SD, HD, and 3G-SDI signals. It supports all SDI-related transmission features, including embedded audio, ancillary data, and even handles ASI signals - asynchronous signals that carry multiple compressed programs that can be at varying transmission speeds. The Mini Converter's settings are controlled using the built-in DIP switches or via USB using the included software for Max OS X or Windows computers. The USB port also enables the firmware to be updated. For powering the device, a 12V power supply is included with international socket adapters.

Additional Features

• 4:2:2 and 4:4:4 sampling and color precision
• 24-bit, 48 kHz audio sampling
• Compliant with SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, and SMPTE 425M standards

Description

The DeckLink Micro Recorder is a low-latency miniature video capture card for all SD and HD formats up to 1080p30. Compatible with computers that have a 1-lane Gen 1 Mini PCIe slot, SDI or HDMI video inputs can be added using the built in Hirose® and Molex® connectors.

ConnectionsPCIx1 Gen 1

PCI Express® Mini Card Electromechanical Specification. Note, however, that the HDMI connector height (8.0mm) exceeds the 3.0mm height specification.

StandardsSD Format Support

525i/59.94 NTSC, 625i/50 PAL.

HD Format Support

720p50, 720p59.94, 720p60,
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30,
1080i50, 1080i59.94, 1080i60,
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30.

Video Sampling

4:2:2.

Color Precision

8, 10-bit YUV 4:2:2.

Compliance

SMPTE 259M, 292M, 296M, and HDMI.

Available AccessoriesPart Numbers

DeckLink Micro Recorder, order code: BDLKMICROREC

HDMI Cable, order code: CABLE-BDLKMIR/HDMI

SDI Cable, order code: CABLE-BDLKMIR/SDI

Physical SpecificationsOperating Systems

Mac 11.1 Big Sur,
Mac 12.0 Monterey or later.

Windows 10, 64-bit.
Windows 11.

Linux

Power RequirementsPower Consumption

3 Watts max

Environmental SpecificationsOperating Temperature

-25°C to 55°C (-13°F to 131°F)

Storage Temperature

-40°C to 75°C (-40°F to 167°F)

Relative Humidity

0% to 90% non-condensing

What's Included

DeckLink Micro Recorder

 

• Packaging Details: 0.008 kg

Key Features

• 4-Channel Live Stream 3G-SDI Switcher
• Program and 4 x Input ISO Recording
• Generates DaVinci Resolve Project
• Live Tally, Stream, and Record Status
• Record Button, Channel Preview Multiview
• 2-Channel Digital Audio Mixer per Source
• 3G-SDI Output, Ethernet ATEM Control
• Media Player, Computer Input Support
• Upstream and Downstream Keyers
• DVE Transition, Chroma/Luma Keyers

Key Features

• Communicate with up to 8 Cameras
• 8 x SDI I/O
• Camera Talkback via XLR, Mini
• Fits in 1 Standard Rack Unit
• Supports SDI Tally Output
• Camera Talkback
• Upgradeable to Accept 8 x Fiber I/O

Blackmagic Design ATEM Talkback Converter 4K Overview

With 12G-SDI, Blackmagic Design's ATEM Talkback Converter 4K accepts high-resolution video from up to eight studio cameras or ATEM Camera Converters and allows the control room to interact with the camera operators. The 12G-SDI connections can support video with resolutions up to 4096 x 2160 at 60 fps and rout those individual signals to a switcher via SDI outputs, to a program monitor via its own SDI output, and back to the camera operator while carrying talkback audio over a single cable. Talkback audio can be captured via a microphone plugged into the XLR jack on the front, or a headset mic plugged into the appropriate jack, also on the front panel.

This unit can be upgraded to accept fiber optic connections, which carry, bi-directional 4K video, audio, and talkback for up to 28 miles without signal degradation. And because of its 1 RU size, it can easily fit into industry standard rack-mount equipment and furniture.